The complete Q&A of prohibited actions in PVC flooring care
Gerflor PVC flooring is itself stain and wear resistant, but incorrect cleaning and maintenance corrodes the surface and shortens its life. This article lists every prohibited action across the whole care routine, sorted into four groups, cleaning products, cleaning tools, cleaning methods and environmental care, applying to both contract and residential settings.
Q&A: the complete list of prohibited actions in caring for Gerflor PVC flooring
Every action to avoid when cleaning and maintaining Gerflor PVC flooring, for home and contract use
Q1: Which cleaning chemicals must never be used on Gerflor flooring?
A: First, never use undiluted concentrated bleach or chlorine-based disinfectant; repeated direct wiping fades the floor and ages the material. Second, never use strong acid or alkali cleaners: oxalic acid, caustic soda and toilet cleaner corrode and dissolve the wear layer. Third, never use petrol, banana oil, neat alcohol or other organic solvents, which damage the surface texture and leave it white and tacky. Fourth, never use coarse abrasive scouring powder, which permanently dulls the surface sheen.
Q2: Which cleaning tools must never be used to remove stains from Gerflor flooring? A: Never use steel wool, hard metal scrapers, coarse sandpaper or industrial grinders on stains or adhesive marks. Never scrub hard with a stiff industrial brush, which scratches the wear layer. Never dry mop with a mop carrying grit, since sand abrades the surface continuously and leaves fine scratches. On sports flooring, never use a hard scrubbing brush at speed on the cushioning surface.
Q3: What wet-cleaning practices should be avoided when mopping Gerflor flooring?
A: Never mop with a soaking wet mop and leave large amounts of water standing on the floor. Never wash the floor with a pressure washer: water travels along welded seams and wall gaps under the flooring and causes debonding, lifting and mould. Never mop without ventilating afterwards, since in a closed space moisture evaporates slowly and prolonged damp shortens adhesive life. Never let water stand overnight in bathrooms or ward areas.
Q4: What waxing practices are prohibited on Gerflor PVC flooring? A: Never build up repeated layers of wax, which trap dirt and make the floor dirtier the more it is cleaned. Never wax residential LVT or multilayer sheet, which clogs the micropores of the surface. Never use stone or solid wood floor wax on Gerflor PVC flooring. Never apply thick wax to old, worn flooring: only a thin coat of dedicated water-based PVC maintenance wax, no more than twice a year.
Q5: In everyday use, which heavy objects and heat sources must be kept off the floor?
A: Never let metal furniture feet without rubber pads or trolleys with metal wheels stand on or be dragged across Gerflor flooring. Never place hot kettles, heaters, welding arcs or other heat sources directly on the surface, since heat softens PVC, distorts it and leaves permanent burn marks. Never let heavy equipment bear on one point for long periods, which causes irreversible denting. Never drop sharp heavy objects onto the floor.
Q6: What should be avoided in long-term vacancy and seasonal care? A: Never leave an unoccupied space entirely closed and unventilated, or leave a damp space without a dehumidifier, which leads to damp and debonding. Never leave curtains open for long periods, since direct sunlight causes local colour variation and makes the material brittle. Never cover the floor with non-breathable plastic film for long periods, which traps moisture under the film and attacks the board. Never mop with scalding water in cold winter conditions, as the sudden temperature change accelerates cracking.
Q7: What additional care actions are prohibited on Gerflor sports flooring?
A: Never apply heavy maintenance wax to sports flooring, which lowers the slip rating and creates a fall risk. Never wash the foam cushioning layer of a sports floor over large areas with strong acid disinfectant. Never walk on the floor in studs or hard leather-soled shoes. Never drop dumbbells or barbells directly onto the surface without a mat.
Avoid every care taboo to protect the full performance of Gerflor flooring
The great majority of whitening, scratching, debonding and fading problems on Gerflor PVC flooring come from prohibited actions during routine care. Use only neutral dedicated cleaners and soft tools, control standing water, keep heat sources and hard objects away, and observe the care rules strictly: the floor will keep its appearance and performance for years and later repair costs fall sharply. Guangzhou Junda Angu can provide standardised care guidance for every Gerflor series.
Hotline: 13423662806 Email: gerflor@hedsom.com
