Constant footfall, stains and chemicals leave PVC flooring scratched, faded and dull over time. This set of professional care techniques for PVC flooring covers daily dust removal, stain treatment, regular protection and damage prevention, keeping homogeneous sheet, LVT and sports flooring looking new for years, and it applies to the whole Gerflor range.
Care secrets for keeping PVC flooring looking new
Six maintenance techniques that lock in the floor's original sheen and put an end to scratches, whitening and fading
Tip one: dry clean before wet, every day, to stop fine scratches at source. Scratches are the number one enemy of PVC flooring's appearance: sand and fine grit on the floor are rubbed across the surface with every step and dull the sheen. Always work dry first, then wet. Sweep daily with an electrostatic mop or microfibre dry mop to take up grit and dust, then wipe with a semi-dry damp mop. In high-traffic areas such as hospitals and schools, dust twice a day, morning and evening, protecting the surface texture at source and keeping the floor bright over the long term. This routine suits every Gerflor flooring series.
Tip two: deal with stains immediately so stubborn marks never become permanent. Ink, grease, chewing gum and disinfectant left on the surface gradually penetrate and form marks that are hard to remove, making the floor look tired. Act at once: wipe food grease with warm water and a neutral cleaner; lift marker marks with a dedicated adhesive remover applied briefly; harden chewing gum with an ice pack and peel it off. Never scrape or scrub once a stain has dried. Prompt cleaning keeps the floor free of mottled marks, and the stain resistance of homogeneous sheet comes fully into its own.
Tip three: use cleaning chemicals correctly to prevent fading and whitening. Strong acids and alkalis, concentrated disinfectant and organic solvents attack PVC, whitening the surface and fading designs, and badly damaging the original character of the floor. Use only neutral cleaners made for PVC, always dilute chlorine-based disinfectants to the specified ratio, and mop with clean water and dry afterwards. Even homogeneous sheet, which is more chemically resistant, should not be exposed to aggressive products repeatedly; gentle cleaning preserves the floor's original colour far longer.
Tip four: protect every setting to avoid damage from hard objects and heat. Metal furniture feet, trolleys with metal wheels and hot appliances all leave irreversible damage. Fit rubber pads under all furniture, hospital beds and school desks and chairs; change the wheels on goods trolleys in shopping centres to soft rubber; keep kettles, heaters and welding equipment away from the floor. On sports floors, no studs or hard leather-soled shoes. This isolates the surface physically from scratches and burns, preserving the design for years.
Tip five: control moisture on the floor to prevent damp, ageing and loss of sheen. Large amounts of standing water and persistent damp loosen the seams, and a damp board turns dull and dark, losing its sheen. Wring the mop out properly, never use a pressure washer on the floor, and ventilate after mopping. Ventilate unoccupied spaces regularly, use a dehumidifier in damp areas, and never let moisture sit under the board, which prevents dulling and ageing.
Tip six: maintain lightly as needed, and avoid over-waxing that ruins the finish. New, high-quality contract PVC flooring needs no frequent waxing: the dense wear layer already has an even sheen. Only floors that have been in use for years and show slight wear and whitening need a thin coat of dedicated water-based PVC maintenance wax, once or twice a year. Residential LVT and multilayer sheet should not be waxed, since built-up wax traps dirt and turns tacky, making the floor look grey and tired; moderate care keeps it looking clean and clear.
Good daily care locks in the floor's original appearance over the long term. Scratches, fading, dulling and whitening on PVC flooring mostly come from gaps in daily cleaning and protection. Follow the six techniques of dust removal first, prompt stain removal, gentle cleaning, physical protection, moisture control and moderate maintenance, and flooring in hospitals, campuses, commercial buildings, sports venues and homes will all stay looking new year round. As official Gerflor distributor for South China, Guangzhou Junda Angu can provide standardised care guidance to match.
Hotline: 13423662806 Email: gerflor@hedsom.com
