Essential flooring performance to consider in a cleanroom
When designing a cleanroom, the choice of materials is critical. These materials, flooring included, must guarantee stable production parameters and meet the regulatory requirements of cleanroom classification (GMP, ISO class).
Of all the materials involved, flooring plays a major role, and the relevant parameters need to be considered.
Cleanroom flooring requirements
Airborne particle control, ISO 14644-1
Depending on the class a cleanroom belongs to, high standards must be applied to meet ISO 14644-1, which covers counting the airborne particles released per cubic metre of air. The floor must release fewer particles than the required ISO class allows, depending on the state of the cleanroom, at rest or in operation. For a GMP Grade A cleanroom, for example, particle levels in use must not exceed ISO 5. Under ISO 14644-1, the flooring selected must therefore meet at least the ISO 5 standard.
Biocontamination control, ISO 846
In a cleanroom, particularly in the pharmaceutical industry, biocontamination levels (bacteria, fungi and so on) must be monitored continuously to prevent any risk of microbial spread. This is why the materials a manufacturer chooses for a controlled environment must not encourage the development of any form of biocontamination.
For our part, cleanroom flooring must not allow micro-organisms to grow on its surface. It is therefore important to ensure that the flooring selected has been certified by a third-party laboratory to ISO 846, which measures bacterial and fungal growth (CFU count) on the floor surface over 28 days. Logically, the flooring should not encourage bacterial or fungal growth during the test.
Special decontamination, ISO 4628-1 and -2
Seventy percent of residual airborne particles end up on the floor (after air disinfection). This means the floor must be easy to clean and free of particles, to avoid any risk of biocontamination. Ensuring that the selected floor has no residual particles on its surface after cleaning is therefore critical. A riboflavin test carried out by a third-party laboratory to ISO 4628-1 and -2 proves that particles on the floor surface can be removed easily.
Resistance and durability
Over the service life of a cleanroom the floor will face a range of stresses: high traffic (pedestrian or mechanical), operational risks such as impacts or scratches, and chemicals or aggressive decontamination products such as H2O2. It is important to identify the challenges the floor will face, match it to the conditions of use and choose accordingly.
Watertightness
To ensure the installation is watertight, the floor must be perfectly joined at seams between sheets (heat welding) and at floor-to-wall junctions (wall coving systems). Certain systems, such as WCS (Watertightness Control System), let you check the watertightness of the floor immediately after installation, and throughout its life, so that any weakness invisible to the eye (from impact or a deep cut) can be repaired as needed.
Maintenance and repair
Floor repair can be tricky in a controlled environment, whether the space is in use or not. Unlike epoxy or polyurethane resin, PVC solutions can be repaired quickly (heat welding for small repairs such as cuts or impacts), or areas needing refurbishment can be replaced easily without stopping production.
ESD characteristics
In some pharmaceutical or electronics cleanrooms, ESD (electrostatic discharge) flooring is recommended to prevent the risk of electrostatic discharge affecting products (semiconductors, printed circuit boards) or processes (machines, electronics), or to protect people from fire and explosion risks (in ATEX areas, for example).
Depending on the ESD problem described, it is important to choose the appropriate ESD standard (IEC 61340, ANSI S20.20, EN14041 and others) and flooring that complies with it.
Mipolam Biocontrol Pure: a solution that still meets ISO 14644-1 after years of use
All flooring used in cleanrooms is tested by an independent laboratory when new, to assess its particle release level. After a few years of use, however, particle release can increase significantly through normal wear and no longer meet the level required by the relevant cleanroom. The choice of flooring should therefore take ageing into account, so that performance stays at the expected level.
This is why Gerflor developed Mipolam Biocontrol Pure to meet the strictest cleanroom standards: GMP/Grade A (ISO 1, tested to ISO 14644-1 by the Fraunhofer Institute).
MIPOLAM® BIOCONTROL PURE has excellent wear resistance and therefore withstands heavy loads. It meets the ISO 1 cleanroom requirements certified to ISO 14644-1.
MIPOLAM® BIOCONTROL PURE has Gerflor's proprietary surface treatment which, in line with ISO 2812-1 and VDI 2083 Part 17, shows excellent resistance to chemicals such as H2O2 in pharmaceutical or controlled environments, supporting cleanroom cleaning and disinfection. To ISO 14644-8, the product has very low outgassing and emissions of chemical molecules such as VOC/SVOC, ammonia, inorganic acids and organic compounds (amines, organophosphates, siloxanes and phthalates), helping control airborne molecular contamination. To ISO 846, the product does not encourage fungal or bacterial growth, helping control microbial contamination.
MIPOLAM® BIOCONTROL PURE has been certified to all of the above standards by FRAUNHOFER.
One of the world's leading cleanroom certification bodies.
Discover the GERFLOR cleanroom flooring range
Contact our cleanroom flooring experts
Contact our cleanroom solution experts for information and advice on bespoke Gerflor cleanroom solutions.
I have read and accept the Privacy Policy.
Thank you for getting in touch
Our industry experts will contact you shortly to handle your request.
The Gerflor Group
Based in France, the Gerflor Group creates and manufactures innovative, design-led and sustainable resilient flooring, wall coverings and accessories, delivering technical and decorative turnkey solutions for a wide range of sectors.
